NEXTAV PTT-Z for Midland BTTalk
Product Descriptions and Highlights
•Bluetooth PTT button which allows you to activate the App’s push-to-talk function wirelessly
•Remembers the paired connection even if you have to replace the battery.
•No charger required.
•So easy to use! ON/OFF POWER SWITCH. NO LIGHT. NO PAIRING BUTTON. Just turn unit on, open the APP, find the PTT in the device settings, and select.
•Power switch control to extend battery life.
•CR2032 battery provides at least 1 year battery life
•IP Rating: IP54 (with an optional weather proof cover: IP56)
•Operating Temp: -20℃±2℃ ~ 50℃±2℃
•Approx. Weight: 10g
•Bluetooth version: Bluetooth V4.0
Product Specification Features
. 2.4GHZ transceiver
. -93dbm sensitivity in Bluetooth low energy mode v4.0
. TX Power -20 to +4dbm
. RSSI (1db resolution)
. ARM Cortex – M0 32 bit processor
. Serial Wire Debug (SWD)
. S100 series SoftDevice ready
. Memory . 256kb embedded flash programmed memory
. 16kb RAM
. Support for non-concurrent multiprotocol operation
. On-air compatibility with nRF24L series
. Flexible Power Management
. Supply voltage range 1.8V to 3.6V
. 2.5us wake-up using 16MHz RCOSC
. 0.6uA @ 3V mode
. 1.2uA @ 3V in OFF mode + 1 region RAM retention
. 2.6uA @ 3V ON mode, all blocks IDLE
. 8/9/10 bit ADC- 8 configurable channels
. 31 General Purpose I/O Pins
. One 32 bit and two 16 bit timers with counter mode
. SPI Master
. Two-wire Master (I2C compatible)
. UART (CTS/RTS)
. CPU independent Programmable Peripheral Interconnect (PPI)
. Quadrature Decoder (QDEC)
. AES HW encryption
. Real Timer Counter (RTC)
. CR2032 battery for 1-2 years life time.